In Becki sei Wiki

Diese Seite ist nicht editierbar. Sie können den Quelltext sehen, jedoch nicht verändern. Kontaktieren Sie den Administrator, wenn Sie glauben, dass hier ein Fehler vorliegt.
====== Linux Networking Tips ==
===== Internet Connection ==
==== Wireless ==

See [[wireless_setup]]

==== Wired with DSL Router ==

The DSL Router usually sets up the internet connection with [[wp>PPPOE]]. This means, on your computer you just have to enable DHCP with ''netconfig''. Thats all.

==== With Dsl Modem ==

Backup:
  cp -a /etc/ppp /etc/ppp.org''
  cp /etc/resolv.conf /etc/resolv.conf.org

setup command (as root): ''pppoe-setup'' (was till Slack10.0 adsl-setup) :

  PPPoE user name:    frn6/stbeckert # Freenet
  Ethernet Interface: eth0
  Activate-on-demand: 180            # yes; idle timeout = 180 seconds
  DNS addresses:      server         # Supplied by ISP's server
  PPPoE password:     ?              # Provided by ISP
  Firewalling:        0              # = NONE : No firewall

  Die Einstellungen kann man nachträglich noch in /etc/ppp/ppoe.conf ändern.

Put ''pppoe-start'' into rc.local

At the first connection there is no resolv.conf, so a ping to e.g web.de won't start the demand-connection. Do a ping to an IP, eg 217.72.195

==== With analog Modem ==

  * ISP example: [[http://www.billiger-surfen.de/anbieter.php3?name=knUUT|knuut]]
  * FIXME Doc ''pppsetup'' with usepeerdns demand debug

To add another ISP later, add username & password to /etc/ppp/pap-secrets (or chap-secrets):
<code bash>
# Username      Server      Password      IP addresses
"knUUt"     *   "knUUt"
"smart91"   *   "surfen"
"avisgo"    *   "avisgo"
</code>

Then adjust the phone number of the ISP in /etc/ppp/pppscript at the line ''OK atdtXXXXXX"''

And finally change the name entry in /etc/ppp/options or options.demand to the username provided by the ISP, eg: ''name "knUUt"''

===== Firewall setup ==

Create ''/etc/rc.d/rc.firewall'' and make it runnable. Thus ''rc.firewall'' will be called automatically by ''rc.inet2'' (which is called by ''rc.M'' which is usually called at boot time).

<code bash>
#!/bin/sh
# Information sources:
#   [1] Masquerading-Simple-HOWTO
#   [2] man iptables

ODEV=ppp0

# LOAD KERNEL MODULES
# ipt_MASQUERADE it will load ip_tables, ip_conntrack and iptable_nat. [1]
# If the kernel is configured with automatic module loading, an attempt will be
# made to load the appropriate module for that table [2]
#modprobe ipt_MASQERADE


# FLUSCH IPTABLES (empty chains, does not reset the policy)
iptables -F			# -t filter ist the default
iptables -t nat -F
iptables -t mangle -F


# FIREWALL:
# allow any existing connections, or anything related (e.g. ftp server
# connecting back to you)
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

# allow new connections only from our intranet (localhost / internal network).
# The ! $ODEV means anything but external device (important also for loopbak)
iptables -A INPUT -m state --state NEW -i ! $ODEV -j ACCEPT

# Default policy: deny everything else:
iptables -P INPUT DROP

# necessary ???
# mal nachgucken, ob sich die Ausgabe von iptables -L mit & ohne diesem Befehl
# unterscheidet:
iptables -A FORWARD -i $ODEV -o $ODEV -j REJECT


# MASQUERADING
# In der NAT-Tabelle (-t nat) eine Regel fuer alle ueber das Internet-
# Device (-o) ausgehenden Pakete, die maskiert werden sollen, hinter dem
# Routing (POSTROUTING) anhaengen (-A).
iptables -t nat -A POSTROUTING -o $ODEV -j MASQUERADE


# Definitions:
#   There are 3 tables: filter (default), nat, mangle
#   A table contains chains (built in or user defined)
#   A chain is a list of rules and a policy
#   A rule specifies packet criteria and a target
#   A target can be ACCEPT, DROP, user-defined chain, MASQUERADE, REJECT, ...
#
# General: (simplyfied)
#   The first rule in the chain with matching packet criteria sends the packet to its rule-target.
#   If the end of a built-in chain is reached, because no rule matched the chain policy treats the packet.
#
# Overview:
#   Table:
#     Chain:
#   filter
#     INPUT       packets coming into the box itself
#     FORWARD     packets being routed through the box
#     OUTPUT      locally-generated packets
#   nat
#     PREROUTING  altering packets as soon as they come in
#     OUTPUT      altering locally-generated packets before routing
#     POSTROUTING altering packets as they are about to go out
#   mangle
#     ...
</code>

FIXME Check, if this is the same as in my old homepage
In Becki sei Wiki

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Seiten-Werkzeuge
