Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- becki:linux:sheevaplug [2011-02-14 13:18]
becki
+++ becki:linux:sheevaplug [2011-06-10 10:05] (aktuell)
becki
@@ Zeile 1: / Zeile 1: @@
 ====== Sheevaplug ==
+Installation of Slackware on a Sheevaplug with MMCard
 ===== Where to buy ==
@@ Zeile 13: / Zeile 16: @@
 For me (on Slack 12.2 and 13.0) it was necessary to ''modprobe ftdi_sio vendor=0x9e88 product=0x9e8f'' before a serial connection with seyon or minicom was possible. [[http://www.openplug.org/plugwiki/index.php/Serial_terminal_program|Source]]
+After inserting the kernel module and powering on the Sheevaplug, ''/var/log/messages'' tells that 2 serial device files are created, eg. ''ttyUSB1'' and ''ttyUSB2''. One of them (probably the latter) ist for the serial terminal. Try both!
 Establish serial connection with eg: ''screen /dev/ttyUSB1 115200'' (and exit with ''Ctrl-a K''; see also: [[gnu screen]])
@@ Zeile 22: / Zeile 27: @@
 ===== Installing Slackware ==
-[[http://mirror.inode.at/data/armedslack/armedslack-13.1/INSTALL_KIRKWOOD.TXT|Source]]
+Source: [[http://mirror.inode.at/data/armedslack/armedslack-13.37/INSTALL_KIRKWOOD.TXT|INSTALL_KIRKWOOD.TXT]]
+Note that it is currently not possible to [[http://lists.armedslack.org/2009-September/000239.html|install Armed on the internal Sheeva NAND Flash]]. You need an MMCard or eSata card. (Used Trascend Ultimate 8GB SDHC Class10, 11,99€)
 ==== Activate NFS ==
@@ Zeile 67: / Zeile 74: @@
 <code bash>
 cd /home/export/armedslack
-rsync --exclude '*/source/*' --delete -Pavv ftp.armedslack.org::armedslack/armedslack-13.1 .
+rsync --exclude '*/source/*' --delete -Pavv ftp.armedslack.org::armedslack/armedslack-13.37 .
 # or use a mirror:
-rsync --exclude '*/source/*' --delete -Pavv mirror.inode.at::mirror/armedslack/armedslack-13.1 .
+rsync --exclude '*/source/*' --delete -Pavv mirror.inode.at::mirror/armedslack/armedslack-13.37 .
 </code>
+This creates ''/home/export/armedslack/armedslack-13.37''.
 Other mirrors are listed in www.armedslack.org/getslack. Note that it is better to use rsync than FTP, because with rsync you can resume an aborted download with reusing already downloaded files.
@@ Zeile 76: / Zeile 85: @@
 <code bash>
-mkdir /tftpboot/armedslack-13.1
+mkdir /tftpboot/armedslack-13.37
-cd /home/export/armedslack/armedslack-13.1/
+cd /home/export/armedslack/armedslack-13.37/
 # Copy the Slackware ARM installer:
-cp -fav isolinux/uinitrd-kirkwood.img /tftpboot/armedslack-13.1/
+cp -fav isolinux/uinitrd-kirkwood.img /tftpboot/armedslack-13.37/
 # The Linux Kernel:
-cp -fav kernels/kirkwood/uImage* /tftpboot/armedslack-13.1/
+cp -fav kernels/kirkwood/uImage* /tftpboot/armedslack-13.37/
 # The Initial RAM disk, used for booting the OS after installation
-cp -fav kernels/kirkwood/uinitrd* /tftpboot/armedslack-13.1/
+cp -fav kernels/kirkwood/uinitrd* /tftpboot/armedslack-13.37/
 </code>
@@ Zeile 126: / Zeile 135: @@
 ==== Slackware ARM installation ==
-Plug in the MMC card and type ''mmcinit'':
+Plug in the MMC card and type ''mmcinit'' (May not work the first time, so retry):
 <code>
@@ Zeile 139: / Zeile 148: @@
 <code>
-Marvell>> tftpboot 0x01100000 armedslack-13.1/uinitrd-kirkwood.img
+Marvell>> tftpboot 0x01100000 armedslack-13.37/uinitrd-kirkwood.img
-Marvell>> tftpboot 0x00800000 armedslack-13.1/uImage-kirkwood
+Marvell>> tftpboot 0x00800000 armedslack-13.37/uImage-kirkwood
 Marvell>> printenv bootargs
 [empty]
@@ Zeile 159: / Zeile 168: @@
 </code>
-Now you can log into the Sheevaplug with SSH as user root with no password.
+Now you can log into the Sheevaplug with SSH as user root with no password: ''ssh root@192.168.0.99''. From here use the ssh, not the serial login.
 ''fdisk -l'' shows your available drive: ''/dev/mmcblk0''. Use ''fdisk'' to partition the drive, cfdisk did not work:
@@ Zeile 165: / Zeile 174: @@
 <code>
 fdisk /dev/mmcblk0
+</code>
+Unset DOS Compatibility flag and change display/entry units to sectors:
+<code>
 Command (m for help): c
 DOS Compatibility flag is not set
@@ Zeile 190: / Zeile 203: @@
   * Keymap: qwertz/de-latin1-nodeadkeys.map
-  * Using ''/dev/mmcblk0p3'' as ''/'' with ext4
   * Using ''/dev/mmcblk0p2'' as swap
+  * Using ''/dev/mmcblk0p3'' :!:  as ''/'' with ext4
   * Using ''/dev/mmcblk0p1'' as ''/boot'' with ext2
-  * Install from NFS with ''/home/export/armedslack/armedslack-13.1/slackware'' as source
-  * Package selection: Everything except KDEI (=default); mode: full
+<note important>With armedslack-13.37, selection of ''ext2'' was ignored and the ''/boot'' was partition formattet with ''ext4'' anyway! Hence booting the system failed after install. Here is a workaround:
+  - Insert the MMCard into a Notbook after installation of armedslack has finished
+  - Save the contents of ''/dev/mmcblk0p1''
+  - Reformat ''/dev/mmcblk0p1'' with the notebook (''mkfs.ext2 /dev/mmcblk0p1'')
+  - Restore the contents of ''/dev/mmcblk0p1''
+</note>
+  * Install from NFS with ''/home/export/armedslack/armedslack-13.37/slackware'' as source
+  * Package selection: Everything except KDEI (=default); mode: full. Installation takes a long time.
 ==== Booting the Slackware ARM OS ==
-FIXME
+Reboot the system with ''reboot'' and enter U-boot once again.
+/*
 <code>
 Marvell>> printenv bootargs_console
@@ Zeile 211: / Zeile 232: @@
 ## Error: "bootcmd_slk" not defined
 </code>
+<code>
+Marvell>> printenv bootargs_console
+bootargs_console=console=ttyS0,115200
+Marvell>> printenv bootargs_root
+bootargs_root=ubi.mtd=1 root=ubi0:rootfs rootfstype=ubifs
+Marvell>> printenv bootcmd
+bootcmd=run bootcmd_mmc; run bootcmd_nand
+Marvell>> printenv bootcmd_slk
+## Error: "bootcmd_slk" not defined
+</code>
+*/
 <code>
@@ Zeile 223: / Zeile 256: @@
 Marvell>>   reset
 </code>
+===== Install Go ==
+See [[golang]]
 ===== Pending / Todo ==

In Becki sei Wiki

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Unterschiede

Seiten-Werkzeuge